Bought 2 replacments fobs from ebay. How does key fob work. 1) communicate with the vehicle's keyless entry system (operates central locking).
Insert The Key Into The Ignition (Do Not Turn It) And Pull Key Out.
Insert the key into the ignition (do not turn) pull key out. I checked with the local dealer, they said they’d program both for $150. Quality, new keyless entry remote key fob for a 2008 toyota tundra.
Start With The Key Out Of The Ignition, Drivers Door Is Open, All Other Doors And Trunk Closed And Drivers Door Is Unlocked.
This remote must be professionally programmed when received by a local automotive locksmith (click here for locksmith search ). Return to step 1 if the locks do not cycle at this point. If you need both a key and remote, order below.
Insert The Key In The Ignition Cylinder.
Take your key fob in your hand and press the 'lock' and 'unlock' buttons at the same time; Hold for half a second. Cost to program was $100.00, think i paid around $35 for the fob and key.
Remove The Key From The Ignition.
So i bought this one off ebay: Turn the ignition to on (do not start) then back to off. We do not recommend going to a dealer, as they may decline programming an aftermarket remote for you.
