Replace the oil filter with a new one. I use lucas fuel system cleaner about every 4,000 miles. 2010 tundra when change coolant and brake fluid and when if fuel system/injector cleaning.
And Remove The Oil Filter.
Turn the key to the on notch. The tools that you’ll need: Press and hold trip meter reset knob and turn the ignition to the “run” position.
I Requested The Price Difference If I Went To Mobile 1 And The Service Rep Stated That The 2010'S Come With Synthetic As Standard And The First Change Is Not Due Until 10K Miles (Though I Have A Sticker On My.
It seems times have changed to the old school pan drop, my thinking is its still the way to go(you get to clean the pan and magnets too). Engine oil, oil filter, tire rotation, etc.) from here, fill in the requested fields with the new “next service” interval (i.e. Dealer says change coolant at 100 k miles firestone.
Video Demonstration Showing All The Required Steps To 100% Change All The Transmission Fluid In Your Toyota Tundra Truck.
If needed, continue to add fluid. Discussion starter · #1 · aug 13, 2010. Next, loosen the oil filter drain plug.
Add Oil To The Engine And Look For Leaks.
Turn the ignition key to the “acc” or “lock” position with the odometer reading shown. Lubricate propeller shaft every 5,000 miles; Brake linings/drums and brake pads/discs;
