This Video Shows You How To Reset The Maintenance Light On A 2010 Toyota Tundra.
Hold down the trip odometer reset knob for at least 5 seconds until the “trip a” odometer reading counts down to “000000” and holds that reading for 1 second. If your vehicle has an ignition button, press the start/stop button two times without step on the brake pedal. The dealship said it code p0022.
While Holding Down The Trip Meter Reset Knob Turn The Ignition To.
For push button models, press “ start ” and do not touch the brake pedal. For some models, this is the button used to switch from the odometer reading to the other two trip meters. This is how you turn off the maintenance light on a prius.
Then The Light Came On Again On December 4Th With 462 Milages.
Turn the ignition switch to the “acc” or “lock” position. Press the trip button for a while and turn the ignition key in the off position. Turn the ignition to run (one position before starting engine).
Some Models Don’t Have The.
Hold this button for a while. The changed the oil and the filter. Turn the key to the on notch.
Push And Hold The Trip Odometer Reset Knob Using Your Left Hand.
Press and hold the odometer button. Using your right hand, turn the ignition switch on (do not start the truck). Nearly every make and model year of toyota vehicle has the same process to reset the maintenance required light.
