Unscrew The Antenna Base (10 Mm) And Drop The Antenna Base Out.
You can also change the broken antenna base by removing the front passenger tire, mud flap, and remove it from the fender edge. I already bought the antenna base replacement. The antenna wire goes into the cab behind the dash and up to the radio.
Check Out The Latest Top Trucks Report!
Buy and place the new antenna and tighten it till the last clamp. Somebody broke off my antenna and it snapped the bolt below the area where i could easily get something into reverse it out. My antenna was broken off so i was able to use the back side of a utility knife in the slots to unscrew.
Next Unscrew The Silver Retainer On The Top Of The Antenna Bezel.
They are designed to be a universal fit for. Top toyota experts jeffrey turcotte. Remove the one 10mm screw that hold it in place.
How I Removed The Broken Off Antenna Threaded Shaft That Screws Into The Antenna Assembly On A Toyota Vehicle.
Now push the rubber grommet to the fender wheel. So you'll need to remove your glove box to access the wire. The threaded portion for the antenna is recessed about.5 down from the top of the copper tube that the antenna sits in.
Leave The Bezel In Place (Rubber Part On The Exterior Of The Fender) Pull The Wiring Out Into The Fender Wheel And Reverse The Process.
How to remove your broken toyota tundra antenna and replace it with a new antenna in 3 minutes or less! This process is nearly universal for any truck tailgate and is pret. Today i show you how to replace the tailgate handle on a 2001 toyota tundra pickup truck.
