Without Releasing The Button, Turn Your Ignition On Again.
Continue holding the odometer button for 10 seconds. While holding it, turn the ignition to the on position again. Hold odo/trip button for at least 5 seconds until “resetting maintenance data” is complete.
Turn The Key To The On Notch.
Once the reading is being displayed on the odometer, switch the ignition off. To reset the maintenance light on your 2010 toyota tundra, follow the instructions below. Turn your ignition off, and hold down the trip meter reset button.
Required Light On A Toyota Tundra.
Turn your key to the off notch. Turn the vehicle all the way off. Turn the ignition to the “on” position, but do not start the engine.
Release The Trip Odometer Knob When “Trip A” Is Displayed Again.
Release the trip odometer knob when trip a. Insert your key into the ignition. Hold the trip a knob, and the ignition is in on position, but the engine is off.
Press And Hold The Trip Odometer Knob.
Go to the ⚙️ settings menu by using the navigation button. Turn your key to the “off” notch. The odometer should display the miles, not the trip meter.
