Do not start the engine. Your maintenance light has been reset. Go down and select the vehicle settings.
Turn On The Car Without Starting The Engine.
Keep hold the button until it says maintenance required resetting maintenance data or you’ll see four zeros and now you are reset it. Continue holding the odometer button for 10 seconds. Turn the ignition to the “on” position, but do not start the engine.
While Holding It, Turn The Ignition To The On Position Again.
Go to the ⚙️ settings menu by using the navigation button. 6 what to do if the toyota tundra maintenance light is not reset? Insert your key into the ignition.
You Can Now Turn The Ignition.
Wait for the system to reset. Turn your key to the on notch, and press your trip odometer knob until trip a is displayed. Required light on a toyota tundra.
Continue To Hold The Odometer Button For 10 Seconds Total.
Now you can turn it off and then start the engine to confirm that everything is done. Turn your key to the off notch. Switch the display to “trip a“ by pressing the display change button or “trip” button.
