The Lens May Pop Off As Well, Try A Very Thin Flathead Screwdriver Or Probe.
Using a flat head screwdriver, pry the dome light covers off. (all the doors shut and everything at rest). Dome light cover popped off.
Install Drivers Side Light Guide.
A high voltage destroys the wire passage, and the dome light fuse burns. This can create some visibility issues at night. I would check the actual dome light assembly, remove it and check the actual wires for power and ground, if still no then you are going to have to trace that wire.
Gently Pry Off Dome Light Cover.
Search by keywords, part numbers or full vin go. Remove dome light cover with a blunt tool (i used a butter knife) 2. It'll be very tightly fit in there, but the overhead console (map lights) isn't secured by anything but clips.
Almost Broke Mine Thinking There Was Only 4.
Nylon removal tool pliers diagonal cutter or wire tie tool scissors drill 1/8” drill bit 1/2” drill bit. Using your small flat head screwdriver, pry off the dome light cover very gently. I was replacing my interior map and dome lights with led lights.
Using A Screwdriver, Remove The 2 Clips.
Cover the tip of a small flathead screwdriver with electrical tape. In this video, 1a auto shows you how to replace a broken, damaged or burnt out dome light bulb. Tape the screwdriver tip before use.
