Then, press the trip button of the odometer for a while you see the lines will appear on display. Step by step work guide for how to reset maintenance light on toyota tundra models step 1: If the system fails to reset, the light will continue flashing.
Material Required For How To Turn Off Maintenance Light On Toyota Tacoma.
Turn the key to the on position with the odometer showing. Turn the ignition key to the “off” position with the odometer reading shown. 2018 model tundra maintenance light reset.
Do Not Start The Engine.
Press and hold the “ trip ” button. Turn the ignition to run (one position before starting engine). Press the odo/trip button to display to trip a.
For Some Models, This Is The Button Used To Switch From The Odometer Reading To The Other Two Trip Meters.
When it's time for an oil change, the symbol main. Turn the ignition key in the off position to reset the maintenance light. Your maintenance light has been reset.
While You Are Holding The Button, Turn The Ignition Key Just Slightly So That The Vehicle Starts Without Kicking The Engine Off.
(for details, see “odometer and two trip meters” on page 108 in this section.) 2. Hold down the knob for at least 5 seconds. Turn the vehicle off and press the trip meter reset button.
